Stealth UHF Radio

[AndyInOz]

So, I finally got around to finishing the UHF radio install.

Sourced an RJ45 pass through cable and socket from a local car/auto parts chain.

I removed a blank switch from the set under the driver's side air vent.
(I've left the blank attached to the harness under the dashboard, in case it needs to go back in.)

The mike cradle is stuck on the door card with double sided sticky tape.

The tricky parts were the trim removal and routing of the cable through the dashboard, fortunately I have a few tools for that kind of thing.

 

[PHEV07]

So, I finally got around to finishing the UHF radio install.

Sourced an RJ45 pass through cable and socket from a local car/auto parts chain.

I removed a blank switch from the set under the driver's side air vent.
(I've left the blank attached to the harness under the dashboard, in case it needs to go back in.)

The mike cradle is stuck on the door card with double sided sticky tape.

The tricky parts were the trim removal and routing of the cable through the dashboard, fortunately I have a few tools for that kind of thing.

View attachment 1505

View attachment 1506

Wow. Nice job.

Thank you for sharing.

You mentioned a Mic Cradle. Is this UHF Radio capable of 2way Communication?

I have never heard of a UHF Radio.

I some of us Canadian are not so up to date on Technology