What are the absolute numbers you got? The SOH is an estimate and can also err on the high side.
Did you reset the data prior to dbcam?
Did you reset the data prior to dbcam?
Reset done before dbcam.What are the absolute numbers you got? The SOH is an estimate and can also err on the high side.
Did you reset the data prior to dbcam?
Which range reduced after the charge? The actual range you can drive until the ICE engine starts, or the range shown on the guess-o-meter?Afternoon, I completed the dbcam as per.the instructions above with the thinkdiag odb. All seems to have gone well until after I had recharged the battery. The charging process went well and finished as normal.
My driving range was reduced to below pre dbcam.
I took the car for a drive anticipating to get new recalculated values with higher driving range.
Unfortunately no improvement in range and.the battery capacity after dbcam was accurate.
What I don't understand is is why it's lower than before dbcam.
I also carried cell smoothing successfully.
Any ideas?
Hi DiaxiwenWhich range reduced after the charge? The actual range you can drive until the ICE engine starts, or the range shown on the guess-o-meter?
Can you check what the battery state of charge is right before the ICE starts?
I completed the dbcam as per the instructions below successfully, however my range had gone down to 12km, with battery capacity of 12Ah.Hi Diaxiwen
I repeated the dbcam yesterday, in case I had messed up something the first time.
I will report back to this is complete.
The thinkdiag app is able to read individual cell voltages. They all seem to be within +/- 0.01-0.02v.Yes 12Ah sounds like it's very low. Are you able to get the individual cell voltages? I don't remember if it can be done from the Thinkdiag tool, but at least Phev Watchdog can do that. If you have one or several cells that is at a voltage that is significantly higher or lower than the other ones in the battery it will disturb the battery capacity measurement process. You can attempt to realign the cell voltages by using the cell smoothing procedure but if the different is too important it won't fix the problem.
Enter your email address to join: