Chuckalicious
New member
- Joined
- Jul 7, 2021
- Messages
- 4
Hi folks, I have a 2015 Outlander PHEV which I bought used (privately) last year. When I was going to do an oil change I realised there was no undertray!
So I ordered one online which arrived with bolts, however the bolts do not fit the holes in the subframe.
From looking at the removal instructions, there should be 2 bolts at the front, 2 at the back and then the sides are held in with trim push clips.
Does anyone know the sizes/specs of the bolts that should be used and the size of the push clips?
I’ve found bolts/screw kits like this:
https://www.ebay.co.uk/itm/37552681...R8DA3IwTjy&var=&widget_ver=artemis&media=COPY
Or like this:
https://www.mitzybitz.com/mitsubish...r-4592/front-sump-bash-guard-skid-plate-bolts
Both are very different suggesting at least one is not right.
Cheers.
So I ordered one online which arrived with bolts, however the bolts do not fit the holes in the subframe.
From looking at the removal instructions, there should be 2 bolts at the front, 2 at the back and then the sides are held in with trim push clips.
Does anyone know the sizes/specs of the bolts that should be used and the size of the push clips?
I’ve found bolts/screw kits like this:
https://www.ebay.co.uk/itm/37552681...R8DA3IwTjy&var=&widget_ver=artemis&media=COPY
Or like this:
https://www.mitzybitz.com/mitsubish...r-4592/front-sump-bash-guard-skid-plate-bolts
Both are very different suggesting at least one is not right.
Cheers.
Last edited:
