jaapv
Well-known member
They'll have to to get an emission measurement. I can't follow the objection, though.
Lance said:Seems your MOT testing is much easier than ours. For the emissions to be tested, a sensor is put up the exhaust and diesels have a smoke test which is literally looking for visible smoke.
I drove a 2017 one for some time and the aircon switch did not impact the guessometer.Grigou said:jaapv said:The "guessometer" will only show an approximate estimate based on your driving before. Having the airconditioning switched on will show an even lower alledged range.
The best way to get some idea about the real range is getting experience with the behaviour of the charge level meter.
The car is very sensitive to driving style in its electricity consumption.
I would add some words : Having the air-conditioning switched on will show an even lower alledged range, in a very pessimistic manner.
And the car is of course very sensitive not only to driving style but to driving conditions too. For example I can reach -in summer- 50 km in EV mode very easily between 70 to 90 kph with a few stops, but it's extremely hard to reach 45 km at max 50 kph in the urban traffic with a lot of stop and go at lights etc ... even with an eco driving style.
Golbrah said:FAKE NEWS about tyres being illegal if you change dimension. You can have any dimension you want as long as the tyres stays inside the fender lines!
Even if it doesent, you wont get into ant problems... you just wont pass the MOT...
michael8554 said:If you've watched those US automobile renovation programes on TV, it would seem that hugely different size wheels that protrude outside the bodywork, showering following cars with stones and spray, are not illegal. They are in the UK. Tyres with incorrect speed rating are probably illegal everywhere. Many car's ABS systems will "complain" if the tyre diameter is not close to original spec. I've never heard of legal problems in the UK with replacement tyres and wheels with a different aspect ratio to spec, so long as they match original diameter and don't protrude outside the bodywork.