If you have not please join our official My Outlander PHEV Facebook Group!

Mitsubishi Outlander PHEV Facebook Group

Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="seabass2814" data-source="post: 55839" data-attributes="member: 5343">Hi. Been getting the clunk from the rear. Really noticeable if the car is pulling away on a hill or if tou come out of reverse and into neutral. Found a link showing the issue. May not be the same problem for everyone.  You have to get right under the rear motor. I filmed mine to get a better look but i think i will have to drop out to really see.  Im hoping i can just buy a new bush and get my local garage to push the new one in for £10 if mine has degraded. https://www.speakev.com/threads/big-clunk-and-car-movement-from-transmission.122169/post-2508298UPDATE UPDATE UPDATE UPDATESo purchased a new mount from a dealer. £130So you need to remove two weights from the frame. On the R/N/S is a nut. Use an impact wrench on this whilst securing the other side. I didnt realise it was a nut and spent ages trying to get the bolt out from the other side. I needed to purchase an impact wrench a universal swivel joint and a 125mm extension bar for the impact wrench. Don't use normal ones.  I cant add pics as they are too large. I'll try and add something to youtube.</blockquote>