If you have not please join our official My Outlander PHEV Facebook Group!

Mitsubishi Outlander PHEV Facebook Group

Reply to thread

Help Support Mitsubishi Outlander PHEV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message

UK spec with roof rails here, and I use the clamps as shown earlier in the thread with no issues. If I am carrying bikes I set the bars the specified 700mm apart so the carriers are level, for longer work loads, I put the bars at the inner side of the bar end cap joins. No pins needed, just do up to the specified torque, I can get both bars on and done up in about 2 minutes.

[QUOTE="Steel188, post: 46941, member: 1722"] UK spec with roof rails here, and I use the clamps as shown earlier in the thread with no issues. If I am carrying bikes I set the bars the specified 700mm apart so the carriers are level, for longer work loads, I put the bars at the inner side of the bar end cap joins. No pins needed, just do up to the specified torque, I can get both bars on and done up in about 2 minutes. [/QUOTE]

Verification